Mold Design & Engineering
With 10 to 30 years of experience in the tooling industry, our mold designers and tooling engineers can provide you with a professional mold flow analysis and the best tooling solution based on your product structure and requirements.
Our mould design director has more than twenty years’ experience in mould industry and mould construction engineers all have over ten years of experience, they are very familiar with every manufacturing process and procedure as well as all the mould components’ standard such as HASCO, DME, MISUMI. They also have a very good knowledge of injection molding technology, attributes of different plastic resins, and the property of common steel. With such profound knowledge and experience, our mould design team can offer you professional mould flow analysis and the best tooling solution based on your product structure and requirements.
We use the regular software like AUTOCAD, PRO-E, SOLID WORK, UG, etc, and can open the format like DWG, X_T, IGS, STP, etc.
Our mold design director has over twenty years of experience in the mold industry and the mold design engineers all have over ten years of experience.
They are very familiar with all manufacturing processes and procedures as well as all mold component standards such as HASCO, DME, MISUMI. They also have very good knowledge of injection molding technology, properties of various plastic resins, and properties of ordinary steel. With this in-depth knowledge and experience, our mold design team can provide you with a professional mold flow analysis and the best mold solution based on your product structure and requirements.
We use popular software such as AUTOCAD, PRO -E, SOLID WORK, UG, etc., and can open formats such as DWG, X_T, IGS, STP, etc.
FAQs about mold design and engineering
Moldflow analysis involves simulating an injection molding cycle with a specific plastic and analyzing the results. Moldflow analysis should be performed before the injection molding process begins, using special software that simulates the design of the part to be manufactured.
Standard types of plastic injection molds are:
- standard edge gate mold base (2 plate mold).
- standard point gate mold base (3 plate mold)
- standard simplified point gate mold base (simplified 3 plate mold)
A standard mold base consists of four parts, i.e. the mold plate, the guide pin bushing, the return pin and the screw.
GPI Background Great Plains Industries (GPI) is one of our customers from the United States, they are popularly known for producing fuel transfer gear pumps, nozzles and meters for industries that produce and distribute hydrocarbon products (oil, gas and fuel). In early May 2021, GPI’s research and development team, led by Mr Smith approached Plastic